4KG Small Gold Melting Induction Machine Furnace For Melting Bronze Steel Iron Silver Copper
4KG Small Gold Melting Induction Machine Furnace For Melting Bronze Steel Iron Silver Copper
Features:
The machine adopts medium frequency induction heating, DSP digital control circuits, and the actual heating temperature can reach 1600 ℃
Used for refining precious metals (gold, silver, copper, iron, etc.). Using the patented magnetic heat technology driving technology, the operation is simple, the melting speed is fast,low energy consumption, the machine volume is small, the outside part is low heat storage.
Specification:
|
Voltage
|
110V/220V
|
||
|
Working Frequency
|
50HZ - 60HZ（industrial furnace price）
|
||
|
Power input:
|
4KG & 8KW Support 100% Full Load（industrial furnace price）
|
||
|
System protection:
|
Double IGBT Over heat protection, Lack water protection.
Non - pot circuit detection function. Automatic many kinds of internal fault detection procedures, such as driving frequency error automatic alarm protection, such as a variety of protection circuits. (industrial electric furnace) |
||
|
Water Cooling system:
|
External water cooler, or direct tap water, only a minute 1L of water flow can be used normally. (industrial electric furnace)
|
||
|
Melting Temp:
|
The actual temperature can be heated up to more than 1500 ℃, the temperature can be raised rapidly, the electricity can be saved, the smelting cost is low, the cost performance is high. (industrial electric furnace)
|
||
|
Melting Speed:
|
500 grams of copper. Silver. Gold. About 6 minutes.Graphite crucibles are necessary. (industrial melting furnace)
|
||
|
Dimension
|
About (315long * 295 wide * 310 high) innovative design, small size, light weight. (industrial melting furnace)
|
||
Operation Steps
1600 Degree Gold Melting Induction Machine Furnaces For Melting Bronze Steel Iron Silver Copper
1. Use the power line to connect the melting furnace & water chiller
2. Put the crucible in the coil, press the operation switch and turn the power to maximum.
3. Put the metal into the crucible.
4. Press the operation switch, turn power to maximum and start melting.
5. High-speed melting is proceeding.
6. About 5 mins, melting is finished, turn off the stop switch.
7. Use the plier to grab the crucible and pour the liquid metal into a graphite ingot mold.
8. Let the machine run in 1 min and then turn off the master switch & pull the plug
