15KW 30-100KHz High Frequency Induction Heater Furnace 2200 ℃ (3992 ℉) High Frequency Machine

15KW 30-100KHz High Frequency Induction Heater Furnace 2200 ℃ (3992 ℉) High Frequency Machine

Advantages:
With constant current and constant power control function to greatly optimize the heating process of metals, realize efficient and fast heating, and fully exert the superiority of the products;Power consumption is half of traditional electron tube high frequency induction heating equipment under same conditions; With 100% load design, can work in 24 hours without stop. Infrared temperature detector can be equipped to realize the automatic control of temperature.

Application：
Do heat treatment for gear wheel and axis ;Continuous annealing for steel wire ; Heating and hot press molding for dishware ; Forging & molding for standard work-piece.


Main parameters:
Model:5KW
Max input power:15KVA
Input voltage:110V/220V/110V 50-60HZ
Temporary load rate:100%
Cooling water pressure:0.06-0.12MPa
Water flow:>6L/MIN
Length of coupling hose:1.5m (max length 6m is available)
Time for heat preservation:1－99s (auto status)
Heating time:1－99s (auto)
Cooling water temperature:<40℃;
Warranty:1 year

Package Include:
1 x 15 KW High Frequency Induction Heater Furnace
 2 x Heating Coils
1 x Foot Switch
1 x English Manual
1x Dry Pot


Special notice:
1. Better control of water quality and temperature is key to the life of the equipment.
2. The two water outlet points shall drain separately without holding together to avoid affecting cooling effect.
3. The power must be cut off when unplugging/plugging the connecting plug between the host machine and the sub machine.
4. Ground the equipment reliably with 6mm2 wires to prevent electric shock.