Jewelry Magnetic Tumbler Jewellery Polishing Machine Jewelry Making Equipment
Jewelry Magnetic Tumbler Jewellery Polishing Machine Jewelry Making Equipment
Specification:
Magnetic Tumbler XXL
Extra Large Workpieces Capacity: about 5kg
Polishing Pins Weight: 200- 800g;
Bucket size: 360*190mm. Voltage: AC220V;
Power: 1500W Timing:0-999 minutes, Total time can be adjustable;
Machine size: 410*410*600mm;
Weight: 45kg;
GW: 62kg
Notice:
Before you insert the pieces you are going to tumble, be sure to fill the chamber with water to the "fill line". Never exceed filling the bowl past the maximum line. Once the water is in place, you then must add the compound. Add 4-5 drops of compound.
Cleaning;
if your pins should turn black in the beginning, they require cleaning. To clean, fill the bowl with water to the "minimum" line and then add sufficient amount of a suitable cleaning compound to bring the level up to the "maximum" line. Run for approximately five minutes, rinse and then repeat this cycle one more time.