RENHE 119 Electric Micromotor Micro motor for Jewelry Carving Grinding 35K RPM Handpiece

RENHE 119 Electric Micromotor Micro motor for Jewelry Carving Grinding 35K RPM Handpiece

Hand drill with carbon brush—119

Main power: 65w                    Electric current: 2A

Input voltage: 220v                 Output voltage: 32v

Machine size: 85mm (H)*101mm (W)*104mm (L)

Main machine weight: 0.97kg

Handle torque: 3.ON.cm

Maximum RPM: 35000r pm

Handle size: 159 cm (L)   Point diameter:18.9mm

Handle weight: 200g

Features selection for forward and reverse direction

Safety overload protection

Introduction:

1. Multipurpose Micromotor for laboratory, jewelry, industry

2. Good work for polishing, cutting, milling, trimming, grinding, casting moulds or materials and finishing surface

3. Dust seal protection for excellent durability

4. Simple and easy operation

5. Installed special ball bearings for super high speed ( less heat and noise)

6. Low noise, low vibration, smooth rotating

Features:

1.High power, high torque unit.

2.Safety overload protection .

3.FC,CE, RoHS certificated.

4.The pedal with speed regulation .

5.less-vibration standard carbon brush motor.

6 Features selection for forward and reverse direction

Note:

1.The pedal wire is inserted behind the main unit

2.  Idling is prohibited

3.After using, please put the handle on the stent

4.When the drill stop turning then chang the drill

5.Adjust the Rotating speed to "0" when you starting up the machine

6.Aftering using, please keep cleaning

Packet include:

1 HighSpeed 35000 rpm Handpiece
1 On/Off Foot Pedal Switch
1 Control Box Main machine 220V
1 Wrench
1 Operation Manual