Category

Five Step for Jewelery Making Casting Process

The five steps in jewellery casting process are as follows:


2-in-1 Casting and Smelting Machine Large Digital Display High Temperature Refining Precious Metal Gold and Silver Jewelry Tools
1. Wax model
The casting preparation begins with the wax model. Based on the 3-D rendition of the design, a wax model or resin material model is carved or printed to represent the pattern of a finished piece of jewellery. The model is then connected to a wax stem by a sprue to form a tree-like structure to allow gold to flow through the “tree” with minimum turbulence or resistance.

2. Investment
The tree with the wax stem and attached wax models is placed inside a metal flask and filled with plaster slurry to create an “invested” mould. Once filled with the slurry, any air bubbles and pockets are removed by “debubblizing” the flask inside a bell jar with negative atmosphere. Once the plaster or investment material sets, it hardens into the jewellery mould.
JT-08 Jewellery Casting Machine Centrifugal Casting Machine Jewelry Making Machine


3. Burnout
The hardened invested mould or flask is placed in a specialized kiln to melt away the wax model at temperatures around 1600° F for 12-16 hours. A well-burned flask has no remaining residue of wax or resin, only a hollow impression or cavity left by the tree in the final invested mould.

4. Melting and Casting
The next step is to pour the gold or molten metal into the hollow cavity of the wax-free mould. Various techniques such as centrifugal casting, vacuum-assisted casting, or pressure casting (explained below in detail) are used to ensure the gold flows evenly into the mould. The gold melts at temperatures from 1,617° F to 2,006° F, depending on the alloy used for varying colour and hardness.

5. Divesting
Divesting is the last step in the jewellery casting process. At this stage, the mould is put into a bucket of cold water to destroy the investment form. Any remaining plaster is chipped away, leaving behind a tree containing models as branches. The models are then cut free from the sprue. The gold pieces of jewellery are now the exact replica of the initial wax pattern. While the spruces are recycled, the jewellery is cleaned, set, buffed, and polished.

Please don't hesitate contact us if you have any questions of order jewelry casting machine, wax injection machine for jewelry or jewelry mold vulcanizer , you can get in touch with us by email or telephone, We will try our best to help you solve the problem as soon as possible.


Previous:How to Choose the Right Microscope for Jewelers
Next:Basic Knowledge of Jewelry Engraving You Should Know
No reviews
Write a review Your Name:


Your Email:


Your Review:
Rating: